VE.Bus BMS

Description

The VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery.
Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets.The BTVs of several batteries can be daisy chained. Please see our LiFePO4 battery documentation for details. 

The BMS will:
Shut down or disconnect loads in case of imminent cell under voltage.
Reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below).
Shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature.

System schematic 1.6kVA 12V MultiPlus 230 Volt system example 4 PIN VE-Bus BMS-Lithium Orion-Tr
System schematic 1.6kVA 12V MultiPlus 230 Volt system example 5 PIN VE-Bus BMS-Lithium Orion-Tr
System schematic 3 Phase VE Bus BMS system 5 pin with 3xQuattro and 4x200Ah 24V Li
Certificate Declaration of Conformity – VE.Bus BMS
Manual Inverting remote on-off cable
Certificate ISO9001 certificate
Manual Non inverting remote on-off cable
Manual Skylla-i remote on-off cable
Datasheet VE.Bus BMS
Manual VE.Bus BMS
High quality photo VE.Bus BMS
Enclosure dimension VE.Bus BMS
Enclosure dimension VE.Bus BMS (3D)
High quality photo VE.Bus BMS (left)
Enclosure dimension VE.Bus BMS (stp)
High quality photo VE.Bus BMS and accessories
System schematic VE.Bus BMS example with 3kW 12V MultiPlus 230V
High quality photo VE.Bus BMS Mains detector
High quality photo VE.Bus BMS Mains detector1
System schematic Victron Van – Automotive – Alternator (ds)
System schematic Victron Van – Automotive – Alternator (sld)
System schematic Victron Van – Automotive – Multi (ds)
System schematic Victron Van – Automotive – Solar (ds)
System schematic Victron Van – Automotive – Solar (sld)